Sunday, February 8, 2015

More wheels built and a look at my 'snatch

I've been working on a couple more wheelsets. One is a set of Shimano M629 hubs with Pacenti DL31 rims and the other is Shimano M675 hubs on WTB Frequency i23 rims. Both use Sapim Race spokes and brass nipples. They were built up with tension being checked and rechecked along the way to get all spokes per side within 5% of each other.



I also sold my Origin 8 frame and replaced it with a Vassago Bandersnatch. I've admired the Vassago bikes for quite some time. They are well built and have a long stable geometry that I enjoy for stability. Built up with the parts off the Origin 8, it loses almost a pound in the frame.

Sunday, January 11, 2015

Wheelset #1

OK, so it's been about a year since my last build so I wanted to start with some rims that might have a large margin of error in my build. The SunRingle MTX33 rims are just that, they are super bomber at 760 grams per hoop for the 29er version. Not svelte by any stretch of the imagination. I started with the front, laced them up, and started to tension them. I had one little lacing error that took me about 15 minutes and a bit of swearing to figure out. Once figured out though it turned out to be a simple fix and I continued. Interestingly enough, I made the same mistake on the rear wheel but it only took about 15 seconds to figure out. In the end both came out very good with nice even tension on each side and true withing ~0.5mm.



I priced this build out at Universal Cycles and it came in at $335 plus shipping. I am selling these for $250 shipped so this is a great bargain. The weight is 2780 grams, yea they are some fucking tanks but they'll probably last forever.

Wednesday, January 7, 2015

Building Wheels as a hobby

I've decided to start building wheels to sell as a small side business. Initially I will be focusing on budget conscientious builds that are durable more than bling.

I got parts for three sets ordered and ready to build. All are using Shimano hubs with the "29er" high torque 32 poe freehub body. All will use Sapim Race spokes and brass nipples.

Set #1
Shimano M529 hubs with Sun Ringle MTX33 29" rims

Set #2
Shimano M675 hubs with WTB Frequency i23 TCS 29" rims

Set #3
Shimano M629 hubs with Pacenti DL31 29" rims

These are ideal for "Clydesdale" riders (the MTX33 wheelset for BIG boys) and seem made for Surly Karate Monkey builds (continuing the strong and durable theme). Prices will be under $300 a set, a bargain for hand built.